Best Manual Rosin Press

Disclaimer: All claims are strictly my personal opinion. As an Amazon Associate, I may earn from qualifying purchases.

The rosin extraction process mainly involves two factors i.e. pressure and heat. The pressure is applied for an interval of time to produce rosin concentrate from the plants/flowers.

The demand for rosin is increasing excessively after the lifting of the ban on cannabis and marijuana use for recreational purposes.

Folk are looking for cost effective and efficient rosin press machines for the extraction of rosin for personal use.

The manual press machines are generally smaller in size and are easy to operate. The weight of these machines is also somehow on the lower side which makes the mobility quick and convenient.

These machines don’t require any hydraulic pump or air compressor for operation. Usually, these machines are provided with an ergonomic handle or a crank wheel to press the hot plates.

Although these machines are pressed manually, the heating plates still require electricity for warming.

The main factors to be considered for the selection of manual heat press machines are portability and ease of operation. We have discussed such machines in detail in our below post.

This will also be helpful for you to choose a better quality manual rosin press machine for your requirements.

7 Best Manual Rosin Press Reviews

Here are the quick links to our chosen list of press machines that are operated manually.

1. Anbull 1 Ton Manual Rosin Press Machine

Editor’s Pick
  • Hand crank for pressing
  • Maximum pressing power is 2 ton
  • Twin heating plates of 3×5 inch size
  • Plates are made of aluminum
  • Energy consumption is 800 watts
  • Digital control panel

Check Latest Price

The Anbull is a reliable name for the manufacturing of manual press machines. The 1 ton press is a well made portable machine. It is one of the best options for home and traveling.

The pressure is manually by a handle fitted at the top of the machine. The handle is rotated clockwise to squeeze the rosin from the loaded material.

The body of the machine allows operating it up to 2 ton, but it is better to keep the pressure below 1 ton. When the extraction process is complete rotate the handle anti-clockwise to release the product.

The product quality with this machine is very good.

The most significant part of this small press is the dual plate heating element. Each plate measures 3×5 inch and is made of aluminum material.

The surface of the plate is insulated to save the heating from escaping. The good thing about this material the heat is uniformly distributed across the length of the plate.

To quickly heat up the plates 800 watts heater are provided with the machine.

To monitor the extraction process closely and accurately a digital controller is fitted at the side of the machine. This controller lets you set the temperature of each plate.

The time of the extraction process can also be managed with this controller. You can set the temperature between 32-450 oF, but it is recommended to keep the temperature below 300 oF for a better and consistent rosin product.

Temperature sensors deliver the accurate reading to the controller.

The weight of this small machine is only 30 lbs and can be packed in a bag to carry along a tour or trip.

What We Like

  • Easy to operate
  • Quick heating
  • Uniform heat distribution
  • Consistent product
  • Lightweight & portable
  • Efficient control

Things to consider

  • The correct voltage of the machine is 110
  • Don’t touch the heated plates

2. Dyrabrest Manual Heat Press Machine

Top Rated
  • Includes handle for manually operating press
  • Adjustable pressure knob
  • Dual heating plates measuring 2×3 inch
  • Plates made of insulated aluminum
  • LCD digital controller
  • Suction cup design silicon feet

Check Latest Price

The Dyrabrest press is a manually operated rosin press machine. The pressure is applied by pressing a built-in handle. You have to sense the pressure physically.

Pressure adjusting knob is also provided with the handle mechanism to increase or decrease the pressure. For better quality of rosin more pressure will have to be exerted.

This machine is a very good choice for extracting rosin at home. It works excellently for the dried flower material.

The best thing about this machine is it is fitted with a double channel LCD controller. The controller allows you to set the temperature between 0-250 oC.

The temperature should not be increased beyond 150 oC. The pressing time can also be set for the process. The LCD screen shows temperature clearly to understand digits.

The heating element of this portable machine is a twin plate. The size of each plate is 2×3 inches. These are made of insulated aluminum material.

The plates are heated up electrically with the heaters. The product produced by these plates is of excellent taste.

Suction cup style silicone feet pads are provided at the bottom of the machines. This keeps the machine stable and balanced during the pressing process.

Furthermore, the weight of the machine is very low and can be easily moved anywhere.

What We Like

  • High quality rosin
  • Temperature control
  • Portable and easy to move
  • Quick heating
  • Stable
  • High quality plates

Things to consider

  • Lacks instructions

3. CNCEST 4 Ton Manual Rosin Press

Best Budget
  • Maximum pressing force is 4 ton
  • Surface area of the plates 4.5×4.7 square inch
  • Aluminum made plates
  • 200 watt heater
  • Double channel temperature controller
  • Weighs 9 kgs

Check Latest Price

The CNCEST is also a well-known name in the manufacturing of the rosin press machines. This manual press machine is operated by pressing the handle.

The maximum pressing power of this machine is 4 ton. This machine follows the philosophy that the more pressure you apply, high quality rosin will be produced.

Pressure adjuster button is also provided to manage the pressure changes.

One of the essential parts of this manual press machine is the heating element consisting of dual plates. The surface area of the plates is 4.5×4.7 square inch.

This area is enough to press around 10 grams of rosin. Furthermore the plates are made of aluminum which keeps the heat for extended time.

The rosin squeezed between these plates is of high quality. Each plate is fitted with 100 watt heater to quickly them heat up.

Double channel digital controller is provided with the machine to adjust the temperature of each independently.

This permits us to monitor the extraction process closely and efficiently. The temperature tolerance range of these plates is 220 oF.

The body of the machine is covered with a metal frame and is very clean. Moreover, the machine remains stable during the pressing. The weight of this machine is only 9 kgs and easy to move.

What We Like

  • Easy pressing mechanism
  • Good heat reception
  • Independent plate control
  • Spectate heater
  • Fully covered
  • Large surface area

Things to consider

  • Press slowly to avoid breaking of the machine

4. NugSmasher Mini Rosin Press Machine

  • Twin heating plates of 2.5×2.5
  • Plates made of 6061 aluminum
  • 70 watt heater for each plate
  • Digital temperature controller
  • Loading capacity 2-6 grams
  • Manual handle for pressing
  • 2 ton pressing power

Check Latest Price

The NugSmasher is one of the best brands for manufacturing rosin press machines. The NS mini is a manually operated machine which can provide pressure up to 2 ton.

If correctly applied pressure, this machine can deliver very high quality rosin. Handle is fitted in the machine to do the job easily.

The plate size of NS mini press is 2.5″x2.5″. These square plates are manufactured from aircraft grade 6061 aluminum material. Each plate is provided with a 70 watt heater to quickly heat it up.

The heat quickly and evenly spreads across the length of the plate. The surface area of this machine is enough to squish 2-6 grams of flower material. It is advised to use 3.5 grams micron bag for this press machine.

A digital temperature controller is provided with the machine to adjust the temperature required for pressing. You can change the temperature for each plate separately.

This controller offers accurate temperature results. It is really very handy to control the extraction process smoothly.

This manual machine is innovative in nature. It features protection for the circuit to make the heating process safe.

Quick plate release is another very good feature of this plate. It can be conveniently carried along on a trip to enjoy the fun of rosin extraction.

What We Like

  • Perfect travel partner
  • Quickly heats up
  • Delivers high quality rosin
  • Innovative
  • Easy to operate
  • Good pressing capacity

Things to consider

  • Yield may affect, if pressure is not applied correctly

5. Olenyer Manual Rosin Press

  • Hand crank for operating
  • Twin heating plates of 2.4×4.7 inch
  • Insulated aluminum made plates
  • LCD controller
  • 900 watts electric heater
  • Separate Temperature sensors for each plate

Check Latest Price

The heat press by Olenyer is a manual driven machine. It is fitted with hand wheel at the top which can be rotated at 360 degree to press the pressure.

The maximum pressure that can be applied by this wheel is 1500 lbs. This press machine is primarily used for rosin extraction, although it can also be used in textile and PU industry.

The design of this heat press includes dual heating plates of 2.4×4.7 inch dimensions. These plates are manufactured from the solid aluminum material. 900 watts electric heaters are fitted in the plates to quickly heat them up.

The heat spreads uniform throughout the surface of the plate. The rosin squeezed with these hot plates is of high quality and taste.

An LCD digital controller is also provided with the press machine to monitor the process more closely and efficiently.

This controller is very innovative in nature and delivers accurate temperature reading. It allows adjusting the temperature of the process as per requirement.

Temperature scale can also be switched. This intelligent controller also features time setting. You can set the pressing time before the start of the process.

The weight of this manual machine is around 12 kgs which is not very difficult to move around. The body of the machine is fabricated from the rust proof material.

What We Like

  • 360 degree crank rotation
  • Portable and lightweight
  • Uniform heat distribution
  • High quality product
  • Efficient control
  • Rust proof body

Things to consider

  • Operating instructions are not clear
  • Don’t press the wheel too much

6. Yonntech Mini Manual Heat Press Machine

  • Dual heating plate of 2×3 inch
  • Aluminum made plates
  • Hand crank for pressing
  • 770 lbs pressing power
  • 350 watts electric heater
  • Double channel controller
  • Time button

Check Latest Price

The Yonntech press is another lightweight and portable machine used for rosin extraction process. The weight of this machine is only lbs that can be packed in a backpack or any traveling back.

It is one of the best choices to enjoy the fresh extraction from freshly collected. The pressure is applied through a handle which can be pressed up to 770 lbs only. Pressure adjusting knob is also provided to change the pressure.

This machine is designed to have dual heating plates of size 2×3 inch. These plates are manufactured from the insulated aluminum. This insulation ensures zero heat loss from the plates.

Thus the rosin temperature remains same and uniform during the pressing process. 350 watt heater is fitted with the plates to quick heat up.

The best thing about this machine is it includes a double channel digital controller. The temperature can be managed by this controller.

The pressing temperature is kept below 250 oF to produce high quality rosin concentrate. This controller also permits to choose between Fahrenheit and Celsius temperature scale.

Time button is also provided with the machine to set the pressing time of the extraction process. The accuracy and performance of the controller is excellent.

What We Like

  • Lightweight & portable
  • Easy pressing
  • Pressure adjustment
  • Time setting
  • Temperature control
  • Uniform and quick heating

Things to consider

  • Gradually apply the pressure to avoid any damage to the machine

7. Rosineer Presso Heat Press Machine

  • Pressing force 1500 lbs
  • Pressure adjusting knob
  • Two heating plates of 2×3 inch
  • Plates made of solid aluminum
  • Precise digital controller
  • Weighs only 12 lbs

Check Latest Price

The Presso by Rosineer is an innovative press machine. It comes in multiple colors. The weight of this machine is only 12 which is low enough to move the machine freely anywhere.

The operation of this small machine is manual. A handle is provided with the machine to press the flower material on the plates.

The maximum force to which this machine can be pressed is 1500 lbs. The quality of rosin extracted with the help of this smart machine is outstanding.

The extraction process is carried out by the combination of pressure and temperature. Dual heating plates are fitted in this portable machine.

The size of each plate is 2×3 inch and made from high heat capacity aluminum material. The plates are heated by electricity. The plates are well aligned and remain in place during the pressing process.

A PID controller is provided with the machine to control the extraction process. The accuracy of this controller +1 oF. The temperature of the plates can be adjusted by using this controller.

Temperature scale switching option is also available for this controller. A time button makes the time adjustment easier. In short the process can be closely monitored by this controller.

Dust cover is the unique feature of this machine. These covers protect the plates from direct contact dust.

Cleaning also becomes easier by installing these covers. Rosin extraction kit is also with this portable machine.

What We Like

  • Stylish & innovative
  • Lightweight & portable
  • Easy to clean
  • Efficient process monitoring
  • Temperature control
  • Dust proof

Things to consider

  • Choose the right micron bag for better quality of rosin

The Buying Guide

The manual rosin press machines are generally smaller in size and are meant for personal and home use.

Different types and sizes of manual press machines are available in the market. The selection of the right machine for your requirements needs to consider the following factors.

Pressing mechanism

The pressing mechanism of the manual machine is the primary factor to consider while purchasing this type of machine. The manual press machines come in multiple designs and sizes.

Normally the manually operated rosin press machines are fitted with a long handle, twist handle or crank wheel.  The handle is pressed to get the job done.

The hand wheel is rotated clockwise to press the material. The hand crank can be rotated at 360 degree to press the flower material between the plates.

The twist handle is also rotated clockwise to perform the pressing. The pressing mechanism of the manual press machine makes the operation easier and convenient.

Pressing Force

The pressing force of the manual press machine is the most important factor to consider while buying a suitable machine for your needs.

The maximum pressing force also decides the quality of rosin extracted. Higher the pressure better will the quality of the rosin and vice versa.

The pressing force of the manual of press machines is different. It depends on the plate size and loading capacity of the flower material.

Generally the manual press machines can be pressed up to 2 ton. Low and high power press machines are also available in the market.

The manufacturer mentions the correct pressing force in their specification sheet. Make sure to check the pressing power of the manual heat press before finalizing the purchase.

Pressure Adjusting Knob

In the manual press machine the pressure is applied by a handle or crank wheel. The pressure is checked by feeling in most of the cases.

No pressure gauge or instrument is fitted on the machine to check the pressure. However, a pressure adjusting knob is provided with the handle mechanism to increase or decrease the pressure during the pressing.

This knob is also useful for releasing the pressure when the extraction process is complete. Check for the pressure adjusting knob while purchasing a manual press machine.

Mobility

The manual machines are generally lightweight and smaller in size. The main benefit of the manual press machine is the easy mobility.

The weight of these machines is relatively low and can be easily carried along on a travel or recreational trip. Furthermore these machines are fitted with a lifting handle to carry the machine along with you.

You can enjoy the natural taste of cannabis by extracting fresh rosin with your friends and buddies.

The manual machines are typically used for domestic or personal use. The small manual rosin press machines are not recommended for workshop use.

These machines can be placed on the table top or on any hard surface for stability during the pressing process. The portability of the machine must also be considered when you purchase the portable rosin press machine for your needs.

Plate Size

The rosin is extracted under heat and pressure. Therefore, dual heating plates are the essential part of manual rosin press machines. The machines have plates of different size.

The size of the heating plates also tells us about the size of the machine. The machines with the smaller plate size are useful for the domestic or personal while the commercial grade press machines have larger plates.

The most common size of heating plates of the manual press machine is 2″x3″. The press machine having plates of this size can squeeze small quantities of flowers and herbs to extract rosin concentrate.

Some machines are fitted with slightly larger plates which also have high pressing power. The plate size dictate the size of the machine you are going to buy for your personal use.

Plate Material

The plate material is also of high importance. You must consider the material of construction of the heating plates to get best results. The heating capacity of the plates primarily depends of the material of construction.

It also tells about the heat distribution throughout the plate length. Generally the plates are made of aluminum or stainless steel material.

These are further insulated to avoid any loss of heat during the extraction process. The aluminum plates provide quick heating. The heat is even distributed throughout the aluminum plate.

The stainless steel made heating plates also allow the heat to be equally spread across the length of the plate. The material of the heating plate of the press machine should also be carefully selected to cater your needs.

Capacity

The capacity of the manual press machine is the amount of rosin extracted from the flowers while pressing. The capacity of manual rosin press machine is on the lower side.

The capacity of the machine also varies with the size of the plate. Larger plate heat machine deliver higher quantity of rosin while the smaller plate press will provide low amount of the rosin concentrate.

The pressure applied on the plates also plays an important role to get concentrate from the flowers. Generally speaking a good quality press machine delivers a yield of up to 25 %.

If a quantity of 10 grams of flowers are pressed then the result will be 2.5 grams rosin. Some innovative machines may even offer high yield.

Temperature Controller

The rosin is extracted from the flowers by pressing them under hot plates. Temperature is therefore an important key factor of the press machine.

The innovative machines are equipped with the digital temperature controller. The temperature reading is displayed on the digital screen which ensures close monitoring of the extraction process.

The controller will allow you to adjust the temperature of each separately as per requirement. The maximum temperature limit also varies with the different plates.

Some plates have very high temperature range of 400 oF while some other machines have lower temperature range of up to 250 oF.

It is recommended to keep the pressing temperature below the 300 oF to produce high quality rosin concentrate.

Time Setting

Pressing time of the flowers also plays important role for extracting rosin concentrate from the herbs and flowers. State of the art press machines are equipped with the dual controller system.

This allows you to adjust the time as well. The general time setting range is between 0-999 seconds.

The pressing time should be adjusted between 40-90 seconds. Pressing the loaded material for a longer time can burn the product and ruin the taste thereof.

Automatic timer shut off is also provided for some press machines. This type of timer will automatically turn off when the plates are opened.

The timer will again start counting from the zero. This feature permits to monitor the pressing process more closely and effectively. The concentrate quality can also be enhanced by controlling the extracting time.

Ease of Operation

The ease of operation of press machine is also considered while purchasing. The manual machines are one of the easiest ones to operate.

These machines are usually smaller in size and can be moved easily anywhere you want. Usually every machine is provided with a handle wheel to press the plates.

Digital controller also makes the presetting of the temperature and pressure easier. Detailed instruction manual is provided every machine to operate it correctly.

The installation of press machine is not a very difficult job. Magnetic or suction cup feet are provided with the machine for balance and stability.

The Final Word

The manual press machines are generally smaller in size and shape. These machines are usually provided with pressing mechanism like handle or crank wheel the handle is pressed to squeeze the rosin out of flower material.

The wheel can be rotated 360 degree to get the job of extraction done. The quality of the rosin produced from these machines is sufficiently high.

We have analyzed 7 different types of manual press machines above. These machines are convenient to operate and easy to move anywhere.

This product analysis is useful for multiple customers to buy a suitable machine for their requirements.

A detailed and comprehensive buying guide is added at the end of the article. This guide is presented in a simple and easy to understand way.

It will enable you to grasp the functionality of the press machine quickly.

We are really hopeful that you will find our discussion handy. We are also confident that you will buy a suitable press machine after reading our above product review.

Related Posts: You may also love to read these reviews and the buying guides


Frequently Asked Questions (FAQs)

Plenty of questions is being asked about the manual heat press machine. We have listed below some of the most frequently asked questions about manual heat press. These questions will also enhance your understanding about the press machine.

How is the pressure applied to a manual press machine?

The manual press machines are provided with either handle or wheel. This handle is pressed to squeeze the flower material for rosin extraction. The wheel is rotated to perform the job.

How is the pressure checked?

Generally for the manual press machines the pressure gauge is not fitted. You have to check the pressure by feeling or by using any outer device. Experience will enable you to measure the pressure correctly.

How are the plates heated?

In manual press machines only pressure is applied manually. The plates are heated with electricity. Different capacity heaters are fitted with the plates to heat it up. One heater is provided separately for each plate for quick heating.

Is 2 tons enough to press rosin?

The manual press machines are usually smaller in size, you don't need more than 5 tons and 2 tons is usually sufficient for personal use pressing. Rosin extraction is still an evolving process and there is no definite parameter for this process.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top